FujiFilm EP-6000, Service Manual

Page: 172 / 445

SS1807-N002 Failure Analysi
－
31/64
Display
error
code
Classification
level Display message
(occurrence, response)
Display message
(guidance to
error)
Estimated cause Trigger of message display Service response
8002 Information
Patient information could
not be obtained from the
server.
The patient information
read from the magnetic
card/barcode will be
displayed.
Abnormality in network occurs, or
the patient information
corresponding to that in server is
not registered. Patient information could not be
obtained from server by the
patient information linkage
function
8003 Information
Cleaning of scope is
being checked.
Please wait for a while.
Scope information was read from
barcode/RFID
8004 Information
Scope information has not
been registered in the
server.
Please check if the scope
has been cleaned.
Scope information is not
registered in server The result of checking the state
of cleanliness was not registered
8005 Information
The scope has not been
cleaned.
Please use a cleaned
scope because of the
possible spread of
infections.
The information for scope that
was not cleaned was read
The result of checking the state
of cleanliness was judged as not
cleaned
8006 Warning
A failure occurred while
checking the cleaning of
scope.
Please check if the
network is in normal state.
A communication error occurred
The result of checking the state
of cleanliness was judged as
error
8007 Information
Cleaning hasn't been
checked yet.
Please check if the scope
has been cleaned before
starting the exam.
Inspection was started without
checking the state of cleanliness
8008 Information
An uncleaned scope may
be attached.
Please check if the scope
has been cleaned before
starting the exam.
Inspection was started with the
result of checking the state of
cleanliness not registered
8009 Information
An uncleaned scope is
attached.
Please check if the scope
has been cleaned before
starting the exam.
Inspection was started without
cleaning