FujiFilm EP-6000, Service Manual

Page: 171 / 445

SS1807-N002 Failure Analysi
－
30/64
Display
error
code
Classification
level Display message
(occurrence, response)
Display message
(guidance to
error)
Estimated cause Trigger of message display Service response
1050 Information SERVICE_SCOPE screen end
1051 Information FACTORY screen end
1052 Information FICEPAGE screen end
1053 Information
Patient information input screen
end log
1054 Information Timeout from light source
1055 Information
Just after executing Create All
Observers
1056 Information
Change in inspection state
(EXAM)
1057 Information
Change in inspection state
(START_STANDBY)
1058 Information
Change in inspection state
(END_STANDBY)
1059 Information
Change in inspection state
(IDLE)
1060 Information Just after entering jig mode
1071 Information
Abnormality was found in
FeRAM, however the operation
continues with flash data
1072 Information Inspection list screen OPEN
1073 Information
DICOM user setting screen
OPEN
1074 Information
DICOM service setting screen
OPEN
1075 Information Inspection list screen CLOSE
1076 Information
DICOM user setting screen
CLOSE
1077 Information
DICOM service setting screen
CLOSE
1078 Information FHTP user setting screen OPEN
1079 Information
FHTP service setting screen
OPEN
1080 Information
FHTP user setting screen
CLOSE
1081 Information
FHTP service setting screen
CLOSE
8001 Information
Patient information is
being obtained from the
server.
Please wait for a while.
The patient information linkage
function was used