71
Using the printer connected to a PC
6
Using
the
printer
connected
to
a
PC
Check
Solution
• If “Universal Serial Bus controllers” is not
displayed, the USB functions is disabled.
Refer to the User’s Manuals supplied with
your PC for details of how to enable the
USB functions.
USB functions are disabled when the item
is marked with a yellow exclamation mark
“!” or red cross “x”. Refer to the User’s
Manuals supplied with your PC for details
of how to enable the USB functions.
Double-click “System” in “Control Panel”,
select device manager, and check if
“Universal Serial Bus Controller” (for card
reader) and “FUJIFILM USB Printer Device”
(for printer) are displayed.
✽
With Windows 2000 Professional /
Windows XP, when the “System
properties” dialog box appears, click
“Hardware” and then click the [Device
Manager] button.
• When “FUJIFILM USB Printer Device” is
not displayed, the USB driver (printer) was
not installed correctly. Uninstall the driver
and then reinstall the driver correctly.
■
When the printer was connected to the PC, the “Add New Hardware
Wizard” appeared.
Check
Install the FinePixViewer and printer drivers
(
→
P.68).
Were the FinePixViewer and printer drivers
installed?
Solution
70
Using the printer connected to a PC
6
INSTALLATION PROBLEMS-Windows
■
The CD-ROM labeled “Windows” was requested during driver installation.
■
The printer is connected to the PC but is not recognized.
Check
Solution
Turn the printer power on.
Check if one end of the USB cable is
connected to the printer and the other end is
connected to the PC.
Is the printer power on?
Are the printer and PC connected by a USB
cable?
Use the printer with Windows 98/98 SE
/Me/2000 Professional/XP.
Is a supported OS used?
Log in by Administrator group. For more
information on Administrator group, refer to
the PC manual.
In the case of Windows 2000 Professional
or Windows XP, does the user log in as a
member of Administrator group?
If they are displayed, driver was not
installed correctly.
Uninstall the corresponding driver and then
reinstall the driver correctly.
Is “USB Printer” (for printer) or “USB Mass
Storage” (for card reader) displayed at
“Other devices” in Device Manager?
Solution
• If no Windows CD-ROM was supplied with the PC, contact the PC manufacturer.
Note
Name of folder
✽
When using CD-ROM Drive D
OS Type
Windows 98
Windows Me
Windows XP
D:\win98
D:\win9x
D:\i386
Windows 2000 Professional
D:\i386
q
Replace the Printpix CD-ROM with the Windows CD-ROM.
w
Click the [Browse] button in the “Copy files” dialog box.
e
In the dialog box that then appears, select the CD-ROM icon in the drive display area,
refer to the information in the table below and specify the appropriate folder and then
click the [OK] button.
r
In the “Copy files” dialog box, click the [OK] button to install the driver. Then click the
[Finish] button.
