Fuji Xerox DocuCentreS2320 User Manual Download

Page: 204 / 257

12 Problem Solving

204

roblem

lvin

Printer Problems

Unable to Print

The table below lists possible solutions when you are unable to print.

Print Output Problems

The table below lists possible solutions to print output problems.

Symptom

Possible Cause

Remedy

Data remains in
the printer icon.

The machine's power is not
ON.

Switch the machine's power ON.

Refer to "Power Source" (P.64).

The computer's cable is
disconnected.

Connect the computer's cable.

The machine's cable is
disconnected.

Connect the machine's cable.

Refer to "Interface Cables" (P.30).

An error has occurred in the
machine.

Check the error information, and take the
required action.

There is a problem in the
network connecting the
computer and machine.

Contact your Network Administrator.

The port is not activated.

Activate the port to use.

Refer to "Activating the Communication Port To Use"
(P.36).

The machine is connected to
multiple computers.

Wait a while, and then try printing again.

Data has been
sent to the
machine.

No paper has been loaded.

Load paper.

There is no paper of the
specified size.

Load paper of the specified size.

Refer to "Loading Paper" (P.87).

An error has occurred in the
machine.

Check the error information, and take the
required action.

Job execution has been
paused.

Use the screen to select whether to cancel the
job.

Symptom

Possible Cause

Remedy

The printout is on
the wrong paper
size.

The wrong size paper was
loaded in the specified tray.

Change the size of the paper loaded in the
tray, or change the print options to use a tray
containing the specified paper size.

The image at the
edges of the
paper is missing.

The document exceeds the
machine's printable area.

Enlarge the machine's print area, or reduce
the document's print area.

The settings
specified in the
printing options
are disabled.

The print driver of another
model machine is in use.

Install the machine's print driver.

An option has not been
mounted.

Check the options mounted in the machine,
and then reselect the items in [Items] under
[Options] in the print driver.

Summary of Contents for DocuCentreS2320

































































































































































































































































Search results

Summary of Contents for DocuCentreS2320

Reviews:

Related manuals for DocuCentreS2320

Brands by name

Popular brands

Fuji Xerox DocuCentreS2320, User Manual

Search results

Summary of Contents for DocuCentreS2320

Reviews:

Related manuals for DocuCentreS2320

Brands by name

Popular brands