Fuji Xerox DocuCentre S2220 User Manual Download Page 91

Page: 91 / 311

Loading Paper

Lo
ad
in

g P
ape

Open the Tray 5 (bypass).

Note

•

If necessary, pull out the extension tray. Pull out
the extension tray gently.

Load paper with the side to be copied or printed
on facing down, inserting paper until its edge
lightly touches against the paper feed entrance.

Important •

Do not load mixed paper types in a tray.

•

Do not load paper above the maximum fill line.
It may cause paper jams or machine
malfunctions.

•

The machine may not be able to feed or create
the desired print quality for some types of
heavyweight paper.

Gently align the paper guides to paper loaded.

Execute the copy or print operation.

Summary of Contents for DocuCentre S2220























































































































































































































































































































Search results

Summary of Contents for DocuCentre S2220

Reviews:

Related manuals for DocuCentre S2220

Brands by name

Popular brands

Fuji Xerox DocuCentre S2220, User Manual

Search results

Summary of Contents for DocuCentre S2220

Reviews:

Related manuals for DocuCentre S2220

Brands by name

Popular brands