Fuji Xerox DocuCentre S2220 User Manual Download Page 280

Page: 280 / 311

13 Problem Solving

280

Pro

lem

Solvin

Open Tray 5 (1), and then while lifting up the
release lever (2) gently open the top left cover
(3).

If the paper is jammed around the fusing unit

1) Pull down the latch.

2) Remove the jammed paper.

Note

•

Do not leave any torn pieces of paper inside the
machine.

3) Return the latch back to their position.

4) Push on the center of the left cover, close it

slowly, and raise the Tray 5 (bypass).

If the paper is jammed within the left cover

1) If the paper is jammed in the location as

shown in the right figure, remove the jammed
paper pulling upwards.

Summary of Contents for DocuCentre S2220























































































































































































































































































































Search results

Summary of Contents for DocuCentre S2220

Reviews:

Related manuals for DocuCentre S2220

Brands by name

Popular brands

Fuji Xerox DocuCentre S2220, User Manual

Search results

Summary of Contents for DocuCentre S2220

Reviews:

Related manuals for DocuCentre S2220

Brands by name

Popular brands