Fuji Xerox DocuCentre S2220 User Manual Download Page 245

Page: 245 / 311

Image Quality Problems

245

Pro

lem

Solvin

The printout is
faint overall.

When using the Tray 5
(bypass) to print, the paper
size specified in the print
driver does not match the
type and size of the paper
actually loaded.

Load paper of the correct type and size in the
Tray 5 (bypass).

Refer to "Loading Paper in Tray 5 (bypass)" (P.90).

Multiple pages were fed
through the machine at once.

Riffle through the stack of paper thoroughly
before loading it.

The paper is
wrinkled.

The paper is unsuitable.

Replace the paper with new paper.

Paper has been added to the
paper loaded.

The paper is damp.

Text is blurry.

The paper is unsuitable.

Replace the paper with new paper.

Paper has been added to the
paper loaded.

The paper is damp.

White or color

patches appear

vertically.

Paper feed

direction

The drum cartridge has
deteriorated or been
damaged.

Replace the drum cartridge with a new one.

Refer to "Replacing the Drum Cartridge" (P.230).

The toner cartridge has run
out of toner.

Replace the toner cartridge with a new one.

Refer to "Replacing the Toner Cartridge" (P.227).

The printout is
slanted.

The paper cassette's paper
guides are not aligned to the
correct position.

Align the horizontal and vertical paper guides
properly.

Refer to "Loading Paper in Trays 1 to 4 (Optional)"
(P.89).

Refer to "Loading Paper in Tray 5 (bypass)" (P.90).

Symptom

Possible Cause

Remedy

Summary of Contents for DocuCentre S2220























































































































































































































































































































Search results

Summary of Contents for DocuCentre S2220

Reviews:

Related manuals for DocuCentre S2220

Brands by name

Popular brands

Fuji Xerox DocuCentre S2220, User Manual

Search results

Summary of Contents for DocuCentre S2220

Reviews:

Related manuals for DocuCentre S2220

Brands by name

Popular brands