Fuji Xerox DocuCentre S2220 User Manual Download Page 20

Page: 20 / 311

1 Before Using the Machine

Bef

ore
Us
ing
the

ine

Locate this product in a well-ventilated area. Do not obstruct ventilation openings
of the product.

Keep the minimum clearance as follows for ventilation and an access to the power
plug. Unplug the product if an abnormal condition is noted.

With Duplex Automatic Document Feeder

(Unit: mm)

1100.9

100

595

325.9

100

587.6

387

1474.6

400

Do not incline the product at more than 10 degree angle. Otherwise, it may fall
over and cause injuries.

10 °

front

back

front

back

right

left

Always lock the wheels of this product after installation. Otherwise, it may fall over
or slide and cause injuries.

Summary of Contents for DocuCentre S2220























































































































































































































































































































Search results

Summary of Contents for DocuCentre S2220

Reviews:

Related manuals for DocuCentre S2220

Brands by name

Popular brands

Fuji Xerox DocuCentre S2220, User Manual

Search results

Summary of Contents for DocuCentre S2220

Reviews:

Related manuals for DocuCentre S2220

Brands by name

Popular brands