Fuji Xerox DocuCentre S2220, User Manual

Page: 54 / 311

2 Environment Settings
54
Env
ironm
ent
Sett
in
gs
2
z
End of Job Timeout
You can set the time length that the machine waits before terminating the connection
when incoming data stops (between 2 and 3600 seconds). (Default: 60)
z PDL Switching
[Enabled] is displayed.
„
Apply button
You can apply changes by pressing this button.
Note • Reboot the machine to enable new settings.
SMTP Server (Connectivity > Protocols)
You can set the SMTP server.
„
Required Information
z SMTP Server IP Address/Host Name
You can enter the SMTP server's address as an IPv4 or IPv6 address or in FQDN format
(up to 256 characters).
z Port Number for Sending E-mail
You can set the port number used by the SMTP server to send an e-mail (a value between
1 and 65535). (Default: 25)
z
Login Credentials for the Machine to access the SMTP Server to send automated e-mails
You can set the authentication method when sending an e-mail by SMTP. You can select
[None] or [SMTP AUTH]. (Default: None)
z Login Name
For SMTP servers requiring authentication, enter the e-mail address of the authenticated
SMTP user (between 1 to 64 ASCII code characters). This can be left blank if SMTP
authentication is skipped.
z Password
You can enter the password for authentication (between 1 and 64 ASCII code
characters). This can be left blank if SMTP authentication is skipped.
z Retype Password
You can verify the authentication password you entered by re-entering it here.
„
Apply button
You can apply changes by pressing this button.
HTTP (Connectivity > Protocols)
You can set the HTTP protocol.
„
Configuration
z Connection
[Enabled] is displayed.
z Physical Connection
[Ethernet] is displayed.
z
Keep Alive Timeout
The keep-alive timeout period is displayed.