Fuji Xerox DocuCentre S2220 User Manual Download Page 228

Page: 228 / 311

12 Maintenance

228

int

na
nc
e

Make sure that the machine is not operating, and
open the front cover.

Hold the handle of the toner cartridge and lift it
up slightly.

Gently pull the toner cartridge out of the
machine.

Important •

Pull out the toner cartridge slowly. Otherwise, toner may spill from the cartridge.

•

Return the used toner cartridges to your local Fuji Xerox representative.

Unpack a new toner cartridge, and shake it
lightly up/down, and left/right 10 times.

Important •

Do not touch the shutter.

WARNING

Never throw a toner cartridge into an open flame. Remaining toner in the cartridge may
catch fire and cause burn injuries or explosion.

If you have a used toner cartridge no longer needed, contact your local Fuji Xerox
representative for its disposal.

Summary of Contents for DocuCentre S2220























































































































































































































































































































Search results

Summary of Contents for DocuCentre S2220

Reviews:

Related manuals for DocuCentre S2220

Brands by name

Popular brands

Fuji Xerox DocuCentre S2220, User Manual

Search results

Summary of Contents for DocuCentre S2220

Reviews:

Related manuals for DocuCentre S2220

Brands by name

Popular brands