Fuji Xerox DocuCentre S2220, User Manual

Page: 97 / 311

Overview of Copy Operations
97
Co
py
5
1
Remove any paper clips or staples from document before placing it in the document
feeder.
2
Place the document in the center of the
document feeder, with the side to be scanned (or
the front surface of a 2 sided document) facing
up.
3
Align the document guides to each side of
document.
4
Open the document stopper.
Document Glass
„
Document sizes supporting automatic detection
The document size is detected automatically when [Original Size] is set to [Auto].
The following document sizes are detected automatically: A3 , B4 , A4 , A4 , B5 ,
B5 , A5 , 11 × 17" , 8.5 × 11" , 8K , 16K , and 16K .
Important •
When copying multiple pages of a document, the document size of the first document sheet is set to
copy the rest of document.
Note • The machine automatically determines the tray holding the appropriate paper, based on the
document size and the specified zoom ratio.
„
Supported document sizes
You can select one of the following document sizes from [Original Size].
A3 , B4 , A4 , A4 , B5 , B5 , A5 , 11 × 17" , 8.5 × 14" , 8.5 × 13" , 8.5 × 11" ,
8.5 × 11" , 8K , 16K , and 16K .
Note • When [Original Size] is set to [Auto], an error screen appears when you place non-standard size
document on the document glass. In this case, select a document size manually by selecting
[Original Size] from the menu items. Depending on the selected document size, the printout may be
too large for the paper or may have shadows at the edges.