Fuji Xerox DocuCentre-IV C2263, User Manual

Page: 342 / 443

6 Send from Folder
342
Sen
d
from
Fold
er
6
„
Thumbnail
Displays the images and names of the files stored in the folder.
Important • If power is cut off immediately after a scanned file is stored in a folder, or if the hard disk space is
insufficient to display thumbnails, files in the folder may not be displayed in thumbnail view. In that
case, display them in list view.
• Characters and images in thumbnail view may not be correctly displayed because they are scaled
down from the actual sizes.
Note • The orientation of an image displayed in thumbnail view depends on which orientation the
document was stored in.
„
Number of Files
Displays the number of files stored in the selected folder.
„
Select All
Selects all the files in the folder. To deselect all the files, select this button again while all the
files are being selected.
„
Delete
Deletes the selected files in the folder.
„
File Details (Preview)
Previews the selected file to allow you to check its details.
Refer to "Checking File Details" (P.343).
„
Job Flow Settings
Displays the [Job Flow Settings] screen on which you can create, link, and execute job flows.
Refer to "Configuring/Starting Job Flow" (P.348).
Note • Files stored in a folder by specifying [Store in Remote Folder] on a print driver are called "print files".
Job flows are not available for print files. If print files are included in the selected files, a job flow can
be executed for the files other than the print files.
„
Print
Allows you to print the selected files separately.
Refer to "Print" (P.345).
„
Batch Print
Allows you to print the selected multiple files as one file.
Refer to "Batch Print" (P.346).