Fuji Electric frenic mini series, User Manual

Page: 202 / 269

9.2 Details of Function Codes
9-45
Chap. 9
FUNCTI
ON C
O
DE
S
P99 Motor Selection
Selects the motor to be used.
Set P99 to: To use:
0 FUJI standard motors (R123 and R90 series)
1 GE motors
3 FUJI standard motors (R88 and R90 series)
4 Other motors
In order to perform automatic control features such as the auto torque boost/auto energy
saving and slip compensation or overload protection for the motor (electronic thermal), the
inverter invokes the rated values and properties of the motor. To match the drive properties
between the inverter and motor, set the motor properties to this code and set function code
H03 (Initialize data) to 2 to initialize the motor parameter. This action automatically
updates the data of function code P03 and the constants used inside the inverter.
When using a FUJI standard motor, select the data listed below according to the model.
- P99 = 0 for FUJI standard 8-series motors (current models)
- P99 = 3 for FUJI standard 6-series motors (conventional models)
For motors from other manufacturers or unknown models, set P99 to 4 (Other motors).
• If P99 is set to 4 (Other motors), the parameters of the FUJI 8-series motor will
apply as an alternative.
• The inverter also supports motors rated by HP (horse power: typical in North
America, P99 = 1).