Fuji Electric frenic mini series, User Manual

Page: 177 / 269

9-20
• If a coast-to-stop command (BX) is issued during an instantaneous power
failure, the inverter exits from the state of waiting for restarting, and enters
Running mode. If any run command is issued, the inverter will start at the
starting frequency preset.
F15 Frequency Limiter (Peak)
F16 Frequency Limiter (Bottom)
Frequency limiter F15 limits the
peak of output frequency. Fre-
quency limiter F16 maintains the
output frequency at the bottom even
if the set frequency is lower than
the bottom. Refer to the figure at
right.
- Data setting range: 0.0 to 400.0
Hz
Set the peak and bottom frequencies correctly; otherwise, the inverter may not
operate. Maintain the following relationship between the limiters:
- (Peak frequency) > (Bottom frequency), (Starting frequency), (Stop frequency)
- (Bottom frequency) < (Maximum frequency)