Fronius Energy Package, Operating Instructions Manual, Page: 96 / 148

Settings – IO mapping
General This menu item allows you to configure the properties of the inverter's individual
inputs and outputs (I/O). You can only select those settings that are supported
by the system concerned (which are determined by the functionality of the sys-
tem and how it has been configured).
An active output that has not been assigned (is "free") remains active until the in-
verter is restarted. The status of an output only changes in the event of new spe-
cifications for assigned services.
Emergency
power
Function Description De-
fault
pin
Grant emergency power locking
Output, triggers disconnection
from the mains (protection)
0
Feedback locking (optional)
Input, gives feedback on whether
locking is active
5
Emergency power request
Input, triggers emergency power
mode
4
Emergency power mode is enabled by configuring these parameters.
Load manage-
ment Up to four pins can be selected for load management here. Additional load man-
agement settings are available in the "Load management" menu item.
Default pin: 1
IO control The pins for the IO control can be set here. Additional settings can be adjusted in
the "PSC editor - IO control" menu.
IO control De-
fault
pin
IO control De-
fault
pin
IO control 1 (optional) 2 IO control 6 (optional) 7
IO control 2 (optional) 3 IO control 7 (optional) 8
IO control 3 (optional) 4 IO control 8 (optional) 9
IO control 4 (optional) 5
IO control feedback
(optional)
0
IO control 5 (optional) 6
AUS - Demand
Response Modes
(DRM) Demand Response Modes for Australia
The pins for control via DRM can be set here:
96