Fronius Energy Package, Operating Instructions Manual, Page: 63 / 148

The INFO menu item
Measured values PV ins.
Insulation resistance of the photovoltaic system and the storage system
Ext. lim.
External power reduction in per cent e.g. specified by grid operator
U PV
Current PV voltage on the terminals even if the inverter is feeding in no power
whatsoever
GVDPR
Grid voltage-dependent power reduction
Fan #1
Percentage of target output for fan
PSS status The status of the most recent inverter fault can be displayed.
IMPORTANT! Due to the low level of insolation early in the morning and in the
evening, the status codes STATE 306 (Power low) and STATE 307 (DC low) are
displayed routinely at these times of day. These status codes do not indicate any
kind of fault at this point in time.
- Press the "Enter" key to see the status of the power stage set and the most
recent fault
- Use the "Up" and "Down" keys to scroll through the list
- Press the "Back" key to close the status and fault list
Grid status The five most recent grid faults can be displayed:
- Press the 'Enter' key to see the five most recent grid faults
- Use the 'Up' and 'Down' keys to scroll through the list
- Press the 'Back' key to close the grid fault display
Device informa-
tion For displaying the settings that will be of relevance to a power supply company.
The values shown will depend on the country setup or the device-specific set-
tings of the inverter.
Display area General / Country-specific setting / MPP tracker / Grid
monitoring / Grid voltage limits / Grid frequency limits /
Q-mode / AC power limit / AC voltage derating / Fault
Ride Through
General: Device type
Fam.
63
EN