Fronius Energy Package, Operating Instructions Manual, Page: 58 / 148

Display settings
Setting range Language / Contrast / Illumination
Language
Set language for display
Setting range German, English, French, Dutch, Italian, Spanish,
Czech, Slovak, etc.
Contrast
Set the contrast on the display
Setting range 0 - 10
Factory setting 5
Since the contrast is temperature-dependent, it may be necessary to adjust the
setting under the "Contrast" menu item when the environmental conditions
change.
Illumination
Initial setting for display illumination
The "Illumination" menu item only relates to the display backlighting.
Setting range AUTO / ON / OFF
Factory setting AUTO
AUTO: The display backlighting is activated by pressing any key. If no key is
pressed for 2 minutes, the display backlighting will go off again.
ON: The display backlighting remains permanently on when the inverter
is active.
OFF: The display backlighting is permanently switched off.
ENERGY YIELD The following settings can be changed/set here:
- Counter deviation / Calibration
- Currency
- Feed-in tariff
- CO2 factor
Setting range Currency / Feed-in tariff
Counter deviation / calibration
Calibrating the counter
Currency
Set the currency
Setting range 3 characters, A-Z
Feed-in tariff
Set the remuneration rate for energy fed into the grid
58