Fronius Energy Package, Operating Instructions Manual, Page: 41 / 148

No
. Function
Switch position
B
Assigned IP address
System monitoring uses an assigned IP address (factory setting: dy-
namic (DHCP))
The IP address can be set on the system monitoring web page.
(2) WLAN LED
-
Flashing green: System monitoring is in Service mode
(IP switch on the system monitoring plug-in card is in position A or
Service mode has been activated via the inverter display, the WLAN
access point is open)
-
Lights up green: WLAN connection established
-
Flashing green/red (alternately): WLAN access point has timed out
following activation (1 hour)
-
Lights up red: no WLAN connection
-
Flashing red: faulty WLAN connection
(3) Solar.web connection LED
- Lights up green: Fronius Solar.web connection established
- Lights up red: Fronius Solar.web connection is required but has not
been established
- Not lit: no Fronius Solar.web connection is required or the option for
sending data to Fronius Solar.web has been deactivated
(4) Supply LED
- Lights up green: internal communication system is providing an ad-
equate power supply; system monitoring is ready for use
- Not lit: no power is being supplied by the internal communication sys-
tem
- Flashing red: update in progress
IMPORTANT! Never interrupt the power supply while an update is in
progress.
- Lights up red: update failed
(5) Connection LED
- Lights up green: good connection within the internal communication
system
- Lights up red: connection within the internal communication system
has been interrupted
(6) LAN connection
Ethernet interface, colour-coded blue, for connecting the Ethernet cable
41
EN