manualshive.com logo in svg

Fronius Energy Package, Operating Instructions Manual, Page: 108 / 148

Share
Download
Fronius Energy Package Operating Instructions Manual Download Page 108

Specifying the charging range

It is possible to define a charging range with a min. and max. charging limit. In this case, it
is not possible for the battery to discharge.

 

Discharging

limit

 

Discharge / charge

0 W

 

 

Charging

limit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Min. char-

ging

500 W

Max. char-

ging

3800 W

 

 

 

 

 

 

 

 

 

 

 

 

 

Specifying the discharging range

It is possible to define a discharging range with a min. and max. discharging limit. In this
case, it is not possible for the battery to charge.

 

 

Discharging

limit

 

Discharge / charge

0 W

 

 

Charging

limit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Max. dis-

charging

3000 W

Min. dischar-

ging

1000 W

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

108

Summary of Contents for Energy Package





















































































































































Reviews:

No comments