Fronius Energy Package, Operating Instructions Manual, Page: 40 / 148

- Dedicated web page displaying current data and a wide range of settings
- Option of connecting directly to Fronius Solar.web
- Internet connection via WLAN or LAN
- Ability to control the inverter load by specifying power limit values, minimum
or maximum running times or target running times
- Ability to control the inverter via Modbus (TCP)
- Ability to assign control priorities
- Ability to control the inverter by means of connected meters (Fronius Smart
Meter)
- Ability to control the inverter via a ripple control signal receiver (e.g. by spe-
cifying the reactive power or effective power)
- Dynamic power reduction, taking self-consumption into account
- Ability to control battery charging in line with the control targets set
- Ability to control emergency power mode
Controls, con-
nections and in-
dicators on the
system monitor-
ing unit
(5)
(1)
(6) (7) (8) (9)
(4)
(2)
(3)
LAN
No
. Function
(1) IP switch
For switching the IP address:
Switch position
A
Default IP address with activating of the WLAN access point
Setting the IP switch to position A also opens an access point to en-
able a direct WLAN connection to system monitoring.
Access data for this access point:
Network name: FRONIUS_239.XXXXXX
Key: 12345678
System monitoring can be accessed by:
- Using the DNS name "http://datamanager"
- Using the IP address 169.254.0.180 for the LAN interface
- Using the IP address 192.168.250.181 for the WLAN access point
40