Fresenius Medical Care multiFiltrate Instructions For Use Manual Download Page 96

Page: 96 / 282

Chapter 4: Operation

4-54

Fresenius Medical Care multiFiltrate IFU-EN-UK 15A-2015

Paediatric CRRT treatments

4.7.4

Inserting the heparin syringe

4.7.5

Complete tubing arrangement

Note

If a heparin syringe is used, it must be inserted and connected before
connecting the patient.



Insert the heparin syringe according to the
instructions.



Turn the rotary selector clockwise until the
next screen displays.

Note on C

The syringe wings must be placed in the syringe wing slot.

Note on D

The thumbplate of the syringe plunger must be positioned between the
clamps of the grip handle.

Warning

Patient hazard: air embolism

The air detector must be clean and dry.
Do not use any ultrasound-conducting objects or media.

Blood clots (coagula) can cause the air bubble detector to fail.

Note

Ensure that the filtrate bag hangs freely and does not touch any other
objects.

Do not insert the filtrate tube too tightly between the blood leak detector
and the filtrate bag.

Summary of Contents for multiFiltrate



























































































































































































































































































Search results

Summary of Contents for multiFiltrate

Reviews:

Brands by name

Popular brands

Fresenius Medical Care multiFiltrate, Instructions For Use Manual

Search results

Summary of Contents for multiFiltrate

Reviews:

Brands by name

Popular brands