Fresenius Medical Care multiFiltrate Instructions For Use Manual Download Page 146

Page: 146 / 282

Chapter 4: Operation

4-104

Fresenius Medical Care multiFiltrate IFU-EN-UK 15A-2015

Treatment menu

4.11 Treatment menu

4.11.1 Deselecting Ci-Ca anticoagulation



Press the

[ESC]

key.



Use the rotary selector to select

Treatment

from the menu bar and press

[OK]

The menu fields shown depend on the
selected treatment mode.



Use the rotary selector to select the
required parameter field from the menu
field and press

[OK]

After a timeout, the display will automatically
return to the treatment main screen.

Warning

After deselecting citrate anticoagulation, the operator has to ensure an
alternative anticoagulation procedure.

Warning

After deselecting citrate anticoagulation, the CVVHD treatment may
only be continued / performed if a calcium-containing HF solution /
dialysate is used.

Warning

After deselecting citrate anticoagulation, the Ci-Ca lines must not be
removed from the pumps before the patient has been completely
disconnected.

Summary of Contents for multiFiltrate



























































































































































































































































































Search results

Summary of Contents for multiFiltrate

Reviews:

Brands by name

Popular brands

Fresenius Medical Care multiFiltrate, Instructions For Use Manual

Search results

Summary of Contents for multiFiltrate

Reviews:

Brands by name

Popular brands