manualshive.com logo in svg

Fresenius Medical Care multiFiltrate, Instructions For Use Manual

Share
Download
Fresenius Medical Care multiFiltrate Instructions For Use Manual Download Page 114

Chapter 4:  Operation

4-72

Fresenius Medical Care multiFiltrate IFU-EN-UK 15A-2015

Membrane plasma separation (MPS)

4.8.6.6

Connecting the patient

If using an NaCl solution with two 
connectors:

 

Disconnect the arterial patient line from 
the NaCl solution and connect it to the 
arterial vascular access.

or

 

Connect the arterial and venous patient 
line to the vascular access.

If using an NaCl solution with one 
connector:

 

Connect the arterial and venous patient 
line to the vascular access.

and

 

Use the rotary selector to select 

Start 

connection? [OK] to confirm!

 and press 

[OK]

.

The optical detector senses opaque fluid.

The blood pump is stopped.

If not done yet when using an NaCl 
solution with two connectors:

 

Disconnect the venous patient line from 
the NaCl solution and connect it to the 
venous vascular access.

Use the rotary selector to select 

Start 

treatment? [OK] to confirm!

 and press 

[OK]

.

Summary of Contents for multiFiltrate



























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands