manualshive.com logo in svg

Fresenius Medical Care multiFiltrate, Instructions For Use Manual

Share
Download
Fresenius Medical Care multiFiltrate Instructions For Use Manual Download Page 90

Chapter 4:  Operation

4-48

Fresenius Medical Care multiFiltrate IFU-EN-UK 15A-2015

CRRT treatments with citrate anticoagulation

4.6.9

Disconnecting the patient and removing the tubing system

Indication of the decreasing reinfusion 
volume.

Selecting 

View treatment history? [OK] to 

confirm!

 will display the treatment 

parameters.

The optical detector senses non-opaque 
fluid.

When selecting 

Continue reinfusion

, the 

remaining reinfusion volume can be 
returned to the patient.

or

 

Use the rotary selector to select 

Terminate reinfusion

 and press 

[OK]

.

The citrate pump stops.

but

 

The treatment will be terminated 
automatically if the reinfusion volume is 0 ml 
and the optical detector senses non-opaque 
fluid.

The citrate pump stops.

Warning

 

It is forbidden to remove the Ci-Ca lines manually before the patient is 
disconnected.

Warning

  

Consumables must be discarded after the treatment in compliance with 
the regulations for the disposal of potentially contaminated materials.

Summary of Contents for multiFiltrate



























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands