Fresenius Medical Care multiFiltrate Instructions For Use Manual Download Page 264

Page: 264 / 282

Chapter 14: Options

14-4

Fresenius Medical Care multiFiltrate IFU-EN-UK 15A-2015

14.2.2.2 Entering the patient / case ID in UF rinse

Indication of the decreasing UF volume and
the remaining rinse time.

Check the currently used patient ID and
case ID.

If no data has been entered yet, the
fields are empty.

Use the rotary selector to select

Enter

patient/case ID? [OK] to confirm!

and

press

[OK]

Check the currently used patient ID and
case ID.

If no data has been entered yet, the
fields are empty.

Use the rotary selector to select

Patient ID

Case ID

and press

[OK]

in order to change

the patient / case ID.

To confirm the patient / case ID, use the
rotary selector to choose

Patient/case ID

correct? [OK] to confirm!

and press

[OK]

Summary of Contents for multiFiltrate



























































































































































































































































































Search results

Summary of Contents for multiFiltrate

Reviews:

Brands by name

Popular brands

Fresenius Medical Care multiFiltrate, Instructions For Use Manual

Search results

Summary of Contents for multiFiltrate

Reviews:

Brands by name

Popular brands