manualshive.com logo in svg

Fresenius Medical Care multiFiltrate, Instructions For Use Manual

Share
Download
Fresenius Medical Care multiFiltrate Instructions For Use Manual Download Page 219

Chapter 8:  Consumables, accessories, additional equipment

Fresenius Medical Care multiFiltrate IFU-EN-UK 15A-2015

8-1

8

Consumables, accessories, additional 

equipment

On request, the local service support organisation will provide 
information on further accessories, consumables, and other additional 
equipment.

Symbols on consumables

When using consumables, it is important to take note of the following 
symbols:

Disposables
Identified by the symbol: 

Do not re-use

Use by date
Identified by the symbol: 

Use by

Long-term operation
Identified by the symbol: 

Indication of the max. operating time and the max. delivery volume

Warning

 

The device has been approved for use with specific consumables and 
accessories.
If the responsible organisation wishes to use consumables and 
accessories other than those specified here, it must first check whether 
they are suitable by obtaining relevant information from the 
manufacturer, for example.
The applicable legal regulations must be complied with.

The manufacturer does not assume any responsibility or liability for 
personal injury or other damage and excludes any warranty for damage 
to the device resulting from the use of non-approved or unsuitable 
consumables or accessories.

2

Summary of Contents for multiFiltrate



























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands