manualshive.com logo in svg

Fresenius Medical Care multiFiltrate, Instructions For Use Manual

Share
Download
Fresenius Medical Care multiFiltrate Instructions For Use Manual Download Page 74

Chapter 4:  Operation

4-32

Fresenius Medical Care multiFiltrate IFU-EN-UK 15A-2015

CRRT treatments

4.5.11 Disconnecting the patient and removing the tubing system

4.5.12 Treatment history

Warning

  

Consumables must be discarded after the treatment in compliance with 
the regulations for the disposal of potentially contaminated materials.

Disconnect the venous patient line from 
the patient.

Remove the pump segment adapter from 
the groove.

Press and hold the 

[START/RESET]

 key 

until the pump segment has been 
completely removed.

Support the removal of the pump 
segment by slightly pulling on it.

Remove the heater bag (depending on the 
treatment mode) from the heater. 

Open the clamps before and after the 
heater bag to facilitate removal of the 
bag.

Remove and dispose of the tubing 
system.

To remove the remaining pump segments, 
proceed as described above.

Use the rotary selector to select 

View 

treatment history? [OK] to confirm!

  

Confirm with 

[OK]

.

Indication of the treatment parameters for the 
respective treatment mode for the entire 
treatment.

Press the 

[I/O]

 key to turn the device off.

Summary of Contents for multiFiltrate



























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands