manualshive.com logo in svg

Fresenius Medical Care multiFiltrate, Instructions For Use Manual

Share
Download
Fresenius Medical Care multiFiltrate Instructions For Use Manual Download Page 57

Chapter 4:  Operation

Fresenius Medical Care multiFiltrate IFU-EN-UK 15A-2015

4-15

4.4.3

Selecting the anticoagulation method

4.4.4

Continuing the previous treatment

Note

 

The following screen will not appear if:

– The Ci-Ca module is not attached.
– Communication between the Ci-Ca module and the multiFiltrate 

device cannot be established. Contact service support.

The decision whether the treatment is to be 
performed with or without citrate 
anticoagulation can already be made during 
the functional test.

Use the rotary selector to select 

On

 or 

Off

 

and press 

[OK]

.

Use the rotary selector to select 

Continue 

previous treatment?

 and press 

[OK]

.

The last treatment that was performed 
will remain stored and can be continued 
with the old parameters.

Exception:

 The flow rate of the heparin 

pump will not be saved! The rate is set to 
0 ml/h and must be reprogrammed for 
each treatment.

or

 

Use the rotary selector to select 

Select 

new treatment?

 and press 

[OK]

.

Summary of Contents for multiFiltrate



























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands