manualshive.com logo in svg

Fresenius Medical Care multiFiltrate, Instructions For Use Manual

Share
Download
Fresenius Medical Care multiFiltrate Instructions For Use Manual Download Page 95

Chapter 4:  Operation

Fresenius Medical Care multiFiltrate IFU-EN-UK 15A-2015

4-53

Paediatric CRRT treatments

4.7.3.1

Inserting the dialysate tubing system (except for CVVH)

4.7.3.2

Inserting the substituate tubing system (except for CVVHD)

Note

 

Depending on the settings, the dialysate or substituate tubing 
arrangement may differ from the illustration. The device has to be set 
up in accordance with the instructions on the screen.

The settings for the tubing system may only be changed by technical 
service support.

Insert the dialysate tubing system 
according to the instructions.

Turn the rotary selector clockwise until the 
next screen displays.

Insert the substituate tubing system 
according to the instructions.

Turn the rotary selector clockwise until the 
next screen displays.

Summary of Contents for multiFiltrate



























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands