Fresenius Medical Care multiFiltrate Instructions For Use Manual Download Page 78

Page: 78 / 282

Chapter 4: Operation

4-36

Fresenius Medical Care multiFiltrate IFU-EN-UK 15A-2015

CRRT treatments with citrate anticoagulation

4.6.3.2

Inserting the substituate tubing system (except for CVVHD Ci-Ca)



Insert the dialysate tubing system
according to the instructions.



Turn the rotary selector clockwise until the
next screen displays.

Warning

A Ci-Ca postCVVHDF treatment may only be performed if a
calcium-containing HF solution is used.

Note

For a Ci-Ca postCVVHDF treatment, the substituate line must always
be connected to the postdilution port.



Insert the substituate tubing system
according to the instructions.



Turn the rotary selector clockwise until the
next screen displays.

Summary of Contents for multiFiltrate



























































































































































































































































































Search results

Summary of Contents for multiFiltrate

Reviews:

Brands by name

Popular brands

Fresenius Medical Care multiFiltrate, Instructions For Use Manual

Search results

Summary of Contents for multiFiltrate

Reviews:

Brands by name

Popular brands