Freescale Semiconductor Microcontrollers, Manual

Page: 809 / 892

Debugger Engine Commands
Debugger Commands
809 Microcontrollers Debugger Manual
OUTPUT
With OUTPUT , you can redirect the Coverage component results to an output file
indicated by the path and file name.
Usage
OUTPUT FileName
Where FileName is file name (path + name).
Components
Coverage component.
Example:
in>coverage < OUTPUT c:\Program
Files\Freescale\myfile.txt
The Coverage output results are redirected to the file
myfile.txt
from the
directory
C:\Program Files\Freescale
.
P
The P command executes a CPU instruction, either at a specified address or at the current
instruction, (pointed to by the program counter). This command traces through subroutine
calls, software interrupts, and operations involving the following instructions (two are
target specific):
• Branch to SubRoutine ( BSR )
• Long Branch to Subroutine ( LBSR )
• Jump to Subroutine ( JSR )
• Software Interrupt ( SWI )
• Repeat Multiply and Accumulate ( RMAC )
For example: if the current instruction is a BSR instruction, the subroutine is executed,
and execution stops at the first instruction after the BSR instruction. For instructions that
are not in the above list, the P and T commands are equivalent.
When the instruction specified in the P command has been executed, the software displays
the content of the CPU registers, the instruction bytes at the new value of the program
counter and a mnemonic disassembly of that instruction.