Freescale Semiconductor Microcontrollers, Manual

Page: 750 / 892

Debugger Engine Commands
Debugger Commands
750 Microcontrollers Debugger Manual
• ATTRIBUTES UPDATERATE ~ Select menu Data > Mode > Periodical
• ATTRIBUTES COMPLEMENT ~ Select menu Data > Format
• ATTRIBUTES NAMEWIDTH ~ Select menu Data > Options > Name Width
Example
Data:1 < ATTRIBUTES MODE FROZEN
In Data:1 (global variables), variables update is frozen mode. Variables are not
refreshed when the application is running.
In the Memory Component
• The ATTRIBUTES command allows you to set the display and state options of
the Memory component window.
• The WORD command selects the word size of the memory dump window. The
word size number is:
– 1 , for byte format;
– 2 , for word format (2 bytes); or
– 4 , for long format (4 bytes).
• The ADR command ON or OFF displays or hides the address in front of the
memory dump lines.
• The ASC command ON or OFF displays or hides the ASCII dump at the end of
the memory dump lines.
• The ADDRESS command scrolls the corresponding memory dump window and
displays the corresponding memory address lines (memory WORD is not
selected).
• SPC (show pc), SMEM (show memory) and SMOD (show module) commands
scroll the Memory component accordingly, to display the code location given as
argument, and select the corresponding memory area
– SPC selects an address,
– SMEM selects a range of memory and
– SMOD selects the module name for the global variable located in the
window.
• The FORMAT command selects the format for the list of variables. The format
is one of the following:
– binary,
– octal,
– hexadecimal,