Freescale Semiconductor ColdFire MCF5211, Reference Manual

Page: 275 / 544

MCF5213 ColdFire® Integrated Microcontroller Reference Manual, Rev. 3
Freescale Semiconductor 17-1
Chapter 17
Programmable Interrupt Timers (PIT0–PIT1)
17.1 Introduction
This chapter describes the operation of the two programmable interrupt timer modules: PIT0–PIT1.
17.1.1 Overview
Each PIT is a 16-bit timer that provides precise interrupts at regular intervals with minimal processor
intervention. The timer can count down from the value written in the modulus register or it can be a
free-running down-counter.
17.1.2 Block Diagram
Figure 17-1. PIT Block Diagram
17.1.3 Low-Power Mode Operation
This subsection describes the operation of the PIT modules in low-power modes and debug mode of
operation. Low-power modes are described in the power management module,
Chapter 7, “Power
Management.” Table 17-1 shows the PIT module operation in low-power modes and how it can exit from
each mode.
Internal Bus
Clock (f
sys/2
)
16-bit PMR n
16-bit PIT Counter
COUNT = 0
Internal Bus
16-bit PCNTR n
Internal Bus
EN
OVW
DOZE
DBG
Prescaler
PRE[3:0] RLD
PIF
PIE
Load
Counter
To Interrupt
Controller