FP PostBase Vision Reference Manual Download Page 182

Page: 182 / 206

PostBase Vision

182

Interface for connection to a personal computer (PC).

USB port.
Interface for connection to external USB devices.

Interface for connection to a local computer network (LAN).

CAN-BUS

The CAN bus (CAN = Controller Area Network) is a serial bus system.
Interface for connecting the feeder.

Symbol for alternating voltage.
Indicates the type of the input voltage.

Symbol / Wiring symbol for a fuse.
This symbol always stays along with the details of the fuse used.

The plate contains important information for the fuse:

Caution:

For continued protection against risk of fire, replace

only with same type and rating of fuse.

Summary of Contents for PostBase Vision















































































































































































































Search results

Summary of Contents for PostBase Vision

Reviews:

Related manuals for PostBase Vision

Brands by name

Popular brands

FP PostBase Vision, Reference Manual

Search results

Summary of Contents for PostBase Vision

Reviews:

Related manuals for PostBase Vision

Brands by name

Popular brands