FP PostBase Vision Reference Manual Download Page 178

Page: 178 / 206

PostBase Vision

178

The connections / interfaces of the
PostBase Vision franking machine are
described in the figure on page 14.

Remove letter catch tray

• Lift the front of the franking machine about

5 cm.

• Move the letter catch tray away to the right.

• Put the franking machine back down.

Remove PostBase Vision from feeder

To feed mail pieces, the hand feed tray

the sealer

the feeder are positioned to the

left of the franking machine.

The housings of the franking machine and
the feeding device in use are mechanically
coupled via catches (on the right side of the
feeding device) and slots (in the franking
machine’s housing).

• Carefully lift the franking machine at the

housing and remove it from the feeding
device at hand.

• Place the franking machine on a firm, level

base.

Summary of Contents for PostBase Vision















































































































































































































Search results

Summary of Contents for PostBase Vision

Reviews:

Related manuals for PostBase Vision

Brands by name

Popular brands

FP PostBase Vision, Reference Manual

Search results

Summary of Contents for PostBase Vision

Reviews:

Related manuals for PostBase Vision

Brands by name

Popular brands