PostBase Vision
72
6.3.3
Feeder
(optional)
Equipped with the feeder, PostBase Vision can feed letters and postcards from a
stack and process them. Please refer to the mail piece specifications and the enve-
lope specifications for automatic sealing on pages 187 to 188.
6.3.3.1 Preparing letter stacks and setting up feeder
Caution! Potential danger due to automatic start-up.
When the PostBase Vision is ready for franking, the letter transport starts up
as soon as an object covers the sensor for letter detection. For this reason,
do not place your hand anywhere near the sensor. Do not allow any objects
to reach the sensor area. This way, you can avoid accidentally starting the
letter transport.
To set up the feeder, you can open the M
ENU
. PostBase Vision is not ready
for franking at this time and the letter transport cannot start.
Preparing letter stacks
• Sort letter stacks so that all envelope flaps
are facing downward.
• Align top edges flush:
Position the letter stack with the letter top
edges on a level surface, loosen up and jog
to align.
Adjusting the letter guide
• Place a stack of letters:
– Side to be printed (address side)
facing up.
– The letter top edges are on the contact
area.
– Do not exceed permissible stack height
(55 mm).
• Adjust the letter guide so that it is flush with
the letter stack.
Contact area
