FP PostBase Vision Reference Manual Download Page 101

Page: 101 / 206

Managing printed text

101

13.2

Changing a text

• Open the M

ENU

• Choose P

RINTED

EXT

• Choose C

HANGE

PostBase Vision displays all of the saved
texts.

• Tap on the text that you want to change.

PostBase Vision opens the on-screen key-
board.

• Change or overwrite the text as you like.

• Confirm with OK.

The new text is stored and appears immediate-
ly in the selection list for advertising imprints.

You can also open texts in the selection list
for editing. Tap on the text you would like to
change until the on-screen keyboard opens.

13.3

Deleting a text

• Open the M

ENU

• Choose P

RINTED

EXT

• Choose D

ELETE

PostBase Vision displays all of the saved
texts.

• Tap on the text that you want to delete.

PostBase Vision deletes the text and informs
you that it has been deleted in a pop-up
above it.

The storage space that has become available
can be used to enter a new text.

Summary of Contents for PostBase Vision















































































































































































































Search results

Summary of Contents for PostBase Vision

Reviews:

Related manuals for PostBase Vision

Brands by name

Popular brands

FP PostBase Vision, Reference Manual

Search results

Summary of Contents for PostBase Vision

Reviews:

Related manuals for PostBase Vision

Brands by name

Popular brands