FP PostBase Vision Reference Manual Download Page 104

Page: 104 / 206

PostBase Vision

104

14.2

Display / print usage data for a defined cost account

• Open the M

ENU

• Choose L

OCAL

CCOUNTS

• Choose R

EPORT

CCOUNT

PostBase Vision opens the selection list with
all cost accounts. The current cost account is
highlighted in colour.

• Tap on the cost account that you want to

see usage data for.

PostBase Vision displays the usage data
(value and number of franked mail pieces) for
this cost account.

Print report

(optional)

• Tap the P

RINT

button.

The pop-up for label printing appears.

• Tap the S

TART

button to print the cost

account report on a label.

Or:

• Insert an empty envelope / postcard onto

the hand feed tray or the feeder.

PostBase Vision prints the report for this cost
account.

Optional

Summary of Contents for PostBase Vision















































































































































































































Search results

Summary of Contents for PostBase Vision

Reviews:

Related manuals for PostBase Vision

Brands by name

Popular brands

FP PostBase Vision, Reference Manual

Search results

Summary of Contents for PostBase Vision

Reviews:

Related manuals for PostBase Vision

Brands by name

Popular brands