Foma P905i, Manual

Page: 54 / 140

52
V
o
ice/
Vi
d
e
op
ho
ne Call
s
■
Auto-redialing
If “Voice call auto redial” is set to “ON”, and a videophone
call is not connected, a voice call is automatically made.
p Videophone calls cannot be connected to the phones that
do not support the videophone function, or to the phones
that are out of the service area or turned off even if they
are videophones. If you have set “Voice call auto redial” to
“ON” and attempt to dial a phone that does not have the
videophone function, the number will be redialed as a
voice call. However, this operation might not work if you
call an ISDN-synchronous 64K or PIAFS access point or
an ISDN videophone that does not support 3G-324M (as of
October 2007), or if you dial the wrong number. Note that
you could be charged for the communication.
p
Once the videophone call has started communications,
redialing as a voice call will not be made.
Function Menu while Entering Phone Number
Function menu Operation/Explanation
Notify caller ID See page 47.
Prefix numbers See page 59.
Int’l dial assist See page 58.
Select image See page 72.
Multi number You can select a phone number to be notified
to the other party. (See page 372.)
Add to
phonebook
See page 87.
Compose
message
You can compose a mail message to send to
the phone number set as the destination
address.
Go to step 3 on page 172.
Chaku-moji See page 55.
You (caller) can switch between a voice call and a videophone
call. This function is available for the mobile phones that can
switch between a voice call and a videophone call.
When the other party’s phone has a function to switch
between the calls, “
” is displayed on your phone
and you can switch from the voice call to videophone call.
1
During a voice call
c
( ) Change
When the other party’s phone has a function to switch
between the calls, you can switch from the videophone
call to voice call by selecting “CHG to voice call” from
the Function menu.
1
During a videophone call
i
( )
CHG to voice call YES
Switching between a Voice Call
and Videophone Call
Switch from a Voice Call to Videophone Call
Switch from a Videophone Call to Voice Call
p
When you select an image to be sent to the other party,
select “Select image”. Go to step 2 of “Set by Call” on
page 72.
p When “Cancel” is selected, the FOMA phone cancels
switching and returns to the voice call.
p While switching, the voice guidance is played back.
Information
p
You can switch between a voice call and a videophone call
repeatedly.
p When i-mode or packet communication is in progress, the
communication is disconnected and then the voice call is
switched to the videophone call.
p Select “NO” on the confirmation display to stop
switching and to resume the videophone call.
p While switching, the voice guidance is played back.