Foma P905i, Manual

Page: 40 / 140

38
Before Using the
Handset
The UIM is an IC card that holds your information such as phone numbers. It can hold data such as Phonebook
entries and SMS messages as well. By sharing a UIM, you can operate multiple FOMA phones for multiple
purposes.
You cannot use the FOMA phone for communication such as voice and videophone calls, i-mode, sending/
receiving mail, or packet communication unless the UIM is inserted.
For details on how to use the UIM, refer to the UIM instruction manual.
When inserting or removing the UIM, take care not to accidentally touch or scratch the IC.
You need to turn off the power and then remove the battery before you insert the UIM. (See page 41)
■ Inserting
■
Removing
Using UIM (FOMA Card)
Insert/Remove UIM
1
Pull the claw to pull the tray
out.
p
Pull out the tray straight until it clicks.
2
Place the UIM on the tray
with its IC-side facing up.
p
Fit the cut corner of the UIM and
tray in place.
3
Push the tray inwards.
p
Push the tray inwards firmly
until it is fixed.
Claw
IC-side is faced up
Cut
Information
p Make sure that you insert/remove the UIM with the FOMA phone closed and held in your hand.
p
Take care not to force the UIM into place because this can break it. And take care not to force the tray into place because it can
brake the tray and the guide rail.
p Take care not to lose the UIM once you remove it.
p
When you replace your UIM (except during Omakase Lock), you need to enter the four- to eight-digit Terminal Security Code
after turning on the power. When you enter the correct Terminal Security Code, the Stand-by display appears. If you enter the
incorrect Terminal Security Code five times in succession, the power turns off. (However, you can turn on the power again.)
1
Follow step 1 of “Inserting” to pull out the
tray and remove the UIM.
■
If the tray is disengaged
Fit and push it straight
into the guide rail.