Foma P905i, Manual

Page: 126 / 140

124
Security Sett
ings
You can reset all the face data files stored in Face
Reader.
1
m
Settings Lock/Security
Lock setting Face reader setting
Enter your Terminal Security Code
Delete stored images YES
The images not judged as yourself by Face Reader
recognition operation are saved. You can use these
images to specify who tried to illegally access your
data.
The image is overwritten every time recognition-failed
image is made.
1
m
Settings Lock/Security
Lock setting Face reader setting
Enter your Terminal Security Code
Recog. failed image Select an image.
p To delete the recognition-failed images, press
i
( ), select “Delete this”, and then select
“YES”.
You can set Face Reader to additionally recognize
blinking of the eyes.
1
m
Settings Lock/Security
Lock setting Face reader setting
Enter your Terminal Security Code
Face reader security Normal or High
Normal . . . Does not recognize blinking of the eyes.
High . . . . . Recognizes blinking of the eyes.
Function Menu of the Face Data Reading Display
Function menu Operation/Explanation
Brightness You can adjust to -3 (dark) t3
(bright).
Select a brightness level.
p You can adjust brightness also by pressing
3
from the Face Data Reading display.
Help You can check the cautions for shooting.
p You can bring up Help also by pressing
0
from the Face Data Reading display.
Delete Stored Images
At Face reader
start-up
± 0
Information
p
You cannot reset the face data files during Personal Data
Lock or IC Card Lock.
p
When you reset the face data files, “PIM/IC security mode”
is set to “Security code”.
Recognition-failed Image
Face Reader Security
You can set a password to be entered instead of the
Face Reader authentication for when “PIM/IC security
mode” is set to “Face reader” or “Double security”.
1
m
Settings Lock/Security
Lock setting Face reader setting
Enter your Terminal Security Code
Change security code Enter the current
Face Reader Security Code.
p If you enter the code for the first time, enter “0000”.
2
Enter a new Face Reader Security Code
(four to eight digits) YES
When “PIM/IC security mode” is set to “Face reader”,
use Face Reader to release the lock instead of using
your Terminal Security Code.
When it is set to “Double security”, use Face Reader for
authentication and then enter your Terminal Security
Code to release the lock.
1
Display for releasing Personal Data Lock/IC
Card Lock Match the face to the guide
frame and press
O o
( ).
Face to the front, and locate the face within the guide
frame. The recognition frame for the eyes and mouth is
displayed, and the guide frame becomes green. When
the recognition frame is not displayed or it comes off,
place your face off the frame; then change the facing
direction of your face to correctly display the recognition
frame.
p Perform the operation for authentication with the same
facial expression as when you stored the face data file.
p
Press
l
( ) and enter your Face Reader
Security Code; then you can operate to authenticate
instead of using Face Reader.
For the Face Reader Security Code, see page 124.
Change Security Code
Use Face Reader to Release Lock
Face Data Reading
display
Guide frame
Recognition frame