123
S
e
curity Settings
You can store your face data files in Face Reader and
use it for authentication when releasing IC Card Lock
or Personal Data Lock. To use Face Reader, you need
to store three or more face data files and set “PIM/IC
security mode” to either “Face reader” or “Double
security”.
■
Notes on using Face Reader
p
The dirty camera might result in erroneous operation. Use
this function after wiping it with a soft cloth to clean the dirt
off.
p
In environment where the face is exposed to strong light and
the brightness significantly differs depending on the region of
the face, the face will not be recognized easily. In this case,
storing might become difficult or the recognition rate (the rate
of correct identification) might be lowered. Adjust so that the
face is exposed to even light.
p
The face might not be recognized normally when its entire
part is exposed to the light and becomes white.
p
Storing the face might become difficult or the recognition rate
might be lowered when the face conditions are as described
below:
・
When the features of the face (eyes, mouth, nose, and
eyebrows, etc.) are hard to see as they are covered by
hair, glasses, or a mask
・
When the brightness significantly differs depending on the
region of the face such as when you are under the light in a
dark place
p
The recognition rate might rise by reacting in accordance
with the face conditions such as by raising the hair so that
the eyes, nose, mouth, and eyebrows are clearly visible
(taking the glasses and mask off) or moving to a place where
the face is exposed to even light. The recognition rate rises
also by storing the face data file additionally.
p
The face authentication technology does not completely
guarantee that you are recognized as yourself. Accordingly,
we are not at all responsible for damages resulting from the
use of this product by a third party or when the damages are
caused by what you could not use the function because of
wrong authentication by Face Reader.
Face Reader Setting
Using Face Reader
<
>
To use Face Reader, store 3 or more face data files.
You can store up to 10 face data files.
1
m
Settings
Lock/Security
Lock setting
Face reader setting
Enter your Terminal Security Code
Store
OK
Face to the front, and locate the face within the guide
frame. You can prevent the failure in authenticating the
face data file, which results from the difference in the
position of the face at storing and authenticating the data.
When your face is recognized, the recognition frame for
the eyes and mouth is displayed and the guide frame
becomes green. When the recognition frame is not
displayed or it comes off your eyes and mouth, place your
face off the frame; then change the facing direction of
your face to correctly display the recognition frame.
p
The number of face data files is displayed by the bar on
the Face Data Reading display.
2
Press
O
o
(
).
The face data file is shot.
3
Press
O
o
(
).
The face data file you have shot is stored. Repeat step 1
through step 3 to store three or more face data files.
p
When the third face data file is stored, the message
appears telling that Face Reader can be more easily
used by adding face data file.
p
When you press
r
, the confirmation display
appears asking whether to delete the face data file.
p
If you try to store the face data file in the same
environment, you might not be able to store it. Change
the direction of the face or the place for shooting.
Store
Face Data Reading
display
Stored number bar
Guide frame
Recognition frame
Information
p
At shooting, the Call/Charging indicator flickers in red and
the shutter tone sounds regardless of the Manner Mode
setting. The sound volume for shutter tone cannot be
changed. Furthermore, the shutter tone does not sound
during playback of a music file by MUSIC Player, or
playback of a program by Music&Video Channel, or in
pause state.
Summary of Contents for P905i
Page 98: ...96 ...
