74
V
o
ice/
Vi
d
e
op
ho
ne Call
s
1
Make a videophone call from a stored phone
number.
After the ring time set for “Remote monitoring” elapses,
Remote Monitoring automatically starts.
p
The image through the receiving end’s camera appears
on the display and the sound comes out of the speaker.
p
You cannot set Voice-only Remote Monitoring.
p
Make a videophone call notifying your caller ID. If the
caller ID is not notified, Remote Monitoring will not start
and the call will be handled as an ordinary incoming
videophone call.
2
Remote Monitoring ends when the calling
end or receiving end presses
h
.
Delete all
YES
Information
<Delete this> <Delete all>
p
If you delete all phone numbers stored as “Other ID”,
“Remote monitoring” is set to “OFF”.
Perform Remote Monitoring
Function menu
Operation/Explanation
■
For answering a videophone call without starting
Remote Monitoring at the receiving end
Press
O
o
(
) or
d
before the FOMA phone
answers a videophone call automatically. If you press
m
(
), the videophone call starts sending the
substitute image to the other party.
p
When a remote monitoring call comes in, “Setting when
opened” is disabled.
p
If you press
h
when a remote monitoring call comes in,
the call will be cut and Remote Monitoring will not start.
Information
p
When your FOMA phone is used for the receiving end, an
image through the caller’s camera appears, and sound
comes out. (You cannot switch to a substitute image.)
p
Remote Monitoring does not start during Manner Mode and
Public Mode (Drive Mode). However, it starts even during
Lock All.
p
When Remote Monitoring is set to “ON” and a videophone
call comes in from the phone number set as “Other ID”,
Remote Monitoring starts after the set ring time, even when
“Ring time”, “Auto answer setting”, or “Record message
setting” is set and regardless of their ring times.
p
When Remote Monitoring is not performed, it is recorded in
Received Calls as a missed videophone call.
p
If the Flat-plug Earphone/Microphone with Switch (option) is
connected when a remote monitoring call comes in, the ring
tone will sound from both the earphone and the speaker,
even when “Headset usage setting” is set to “Headset only”.
p
You may be imposed punishment according to the law
and rule (such as the nuisance prevention ordinance) if
you use the FOMA phone to give a remarkable nuisance
and misdeed to the public.
p
The ring tone for Remote Monitoring sounds. (You cannot
change the ring tone for Remote Monitoring.)
The ring tone sounds at the volume set for “Videophone” of
“Ring volume”, but at “Level 2” if you have set “Step”, “Level
1” or below.
The flickering color is “Gradation”, and its flickering pattern
is “Standard”, regardless of the Illumination setting.
p
You cannot put incoming remote monitoring calls on
answer-hold (On Hold).
p
If you set both Call Forwarding Service and Remote
Monitoring, and give priority to Remote Monitoring, set its
ring time shorter than that for Call Forwarding Service.
p
To use Call Forwarding Service for Remote Monitoring,
store the phone number of dialing side as “Other ID” and set
a 3G-324M videophone as the forwarding destination.
Please be considerate of the privacy of
individuals around you when shooting and
sending photos using camera-equipped
mobile phones.
Information
Summary of Contents for P905i
Page 98: ...96 ...