Foma P905i, Manual

Page: 47 / 140

45
Be
fo
re Us
in
g the Hand
set
1
Press and hold
h
for at least two seconds.
The exit display appears and the power turns off.
p
You cannot turn on the power immediately after turning off the power. Wait a few seconds.
1 m
設定
(Settings)
ディスプレイ
(Display)
バイリンガル
(Select language)
Japanese (
日本語
) or English (
英語
)
p The following functions are different between Japanese display and English display:
If the date and time, Terminal Security Code, Keypad Sound, Caller ID Setting, or Location Request Menu is not set, the Initial
Setting display appears when the power is turned on. You can set the initial settings also from each menu function separately.
1
Turn on the power YES
p When the display for entering your Terminal Security Code, PIN 1 code, or PIN 2 code
appears, follow the operation on page 45.
2
Set the date and time.
You can select “Auto time adjust ON” or “Auto time adjust OFF” for setting the time. (See page 46)
■
When your UIM is replaced (except during Omakase Lock)
Enter the four- to eight-digit Terminal Security Code after turning on the power. When you enter the correct Terminal Security
Code, the Stand-by display appears. If you enter the incorrect Terminal Security Code five times in succession, the power turns
off. (However, you can turn on the power again.)
■
When “PIN1 code entry set” of “UIM setting” is set to “ON”
Enter the four- to eight-digit PIN1 code after you turn on the power. When you enter the correct PIN1 code, the Stand-by display
appears. See page 118 for PIN1 code.
■
When “Auto reset setting” of “Notice call cost” is set to “ON” (except during Omakase Lock)
Enter the four- to eight-digit PIN2 code after you turn on the power. When you enter the correct PIN2 code, the Stand-by display
appears. If you press
r
or
h
without entering the correct PIN2 code, “Auto reset setting” is set to “OFF” and the
Stand-by display appears. See page 118 for PIN2 code.
Turn Power Off
Information
p Each entry display appears in the order of “PIN1 code” → “Terminal Security Code” → “PIN2 code”.
+ m - 1 - 5
Select Language
Switching to English
< >
Functions Japanese English
Info Notice Setting
電子音
(Electrical tone)
ボイス (Voice)
OFF
ON
Not available
OFF
“Clock” → “Day of week” of
Display Setting
Available Not available
使いかたナビ
(Guide)
Available Not available
Voice Guidance Available Not available
Information
p
When you insert the UIM, the “
バイリンガル
(Select language)” setting is stored on the UIM.
Initial Setting
Executing Initial Settings
< >
ᵡᶍᶌᶒᶇᶌᶓᶃᶂ