Fluidwell D030-P Series User Manual Download Page 10

Page: 10 / 44

CHAPTER

FW-D030-P-MAN-EN-V0102_02

Specifications of the D030-P

General specifications

Display

Type

High intensity reflective numeric and alphanumeric LCD, UV-
resistant.

Digits

Seven 17mm (0.67") and eleven 8mm (0.31")digits.
Various symbols and measuring units.

Refresh rate

User definable: fast - 1 sec - 3 sec - 15 sec - 30 sec - off.

Option ZB

Transflective LCD with bi-color LED backlight; green / amber.
Intensity and color can be adjusted in the configuration menu.
High contrast readings in full sunlight and darkness.

Panel Mount Enclosure

General

Die-cast ALU (aluminum) enclosure with Polycarbonate
window and silicone.

UV stabilized and flame retardant material. GRP back cover.

Control Keys Three industrial micro switch keys. UV-stabilized silicone

keypad

Painting UV-resistant 2-component industrial paint

Dimensions 144 x 72 x 71.4mm (5.67" x 2.83" x 2.81") – LxHxD

Weight 325 gr.

Classification IP66, IP67 (NEMA4x) at the front-side

Panel cutout

138 x 68mm (5.43" x 2.68") – LxH

Panel thickness

Max. 6mm (

Type HB Die-cast ALU panel-mount enclosure according: DIN 43700 /

IEC 61554

Temperature

Operating

-40°C to +80°C (-40°F to +176°F) ambient

Approvals and compliances

EMC compatibility

Compliant ref: EN 61326 (1997), EN 61010-1 (1993).

Power supply

Type PB

3,6V Lithium battery life-time depends upon settings and
configuration – up to 5 years.

Type PD

24V AC / DC + 10%. Power consumption max. 5 Watt.

Type PM

115-230V AC + 10%. Power consumption max. 15 Watt.

Type PX

8-30V DC. Power consumption max. 0.3 Watt.

Type ZB

20 - 30V DC. Power consumption max. 1 Watt.

With type PD - PM: Internally powered

Summary of Contents for D030-P Series













































Search results

Summary of Contents for D030-P Series

Reviews:

Related manuals for D030-P Series

Brands by name

Popular brands

Fluidwell D030-P Series, User Manual

Search results

Summary of Contents for D030-P Series

Reviews:

Related manuals for D030-P Series

Brands by name

Popular brands