4
18
FW-D030-P-MAN-EN-V0102_02
CHAPTER
Configuring the D030-P
General
The D030-P has three buttons and four modes of operation, one of which is “off”.
The active modes are displayed by status indicators. Configuration of the D030-P is possible via
the Setup and Program modes, which are indicated by
and
.
• Familiarize yourself with the next sections on display functions, keypad functions and the
quick reference menu –before accessing the D030-P configuration modes.
• Also familiarize yourself with the sections on the D030-P setup functions and what
immediate
impact they have on its response, before attempting to modify them.
The D030-P Display Functions
The D030-P has a large transflective LCD with a number of symbols and digits to display
measuring units, status information, trend indication and keyword messages.
The D030-P Key Functions
The following keys are available:
SETUP
PROGRAM
Warning:
Not understanding the effect of your changes can cause unexpected system responses,
resulting in process inefficiency, product spilling and downtime.
Figure 20:
The display functions of the D030-P
Indication of large
display readout
Measuring units large display
readout
Large display trending
(increase or decrease)
Numerical 17mm large display
readout
low battery indicator (replace
when steady)
D030-P status indicators
indication of small
display readout
Alphanumerical small display
readout
RUN
LOW BATTERY
SET-UP
PAUSE
ALARM
PROGRAM
READY
This key is used to access various configuration modes, program items and enter values.
Use this key when you see
PROG
or
ENTER
in the text.
This key is used to START the batch process and to change blinking values and states or to configure the
unit.
Use this key when you see
START
or in the text.
Press
STOP
to "PAUSE" the batch process. Pressing this key twice finishes the process completely and it
can't be continued.
STOP
is also used to select Total and accumulated total and to select a value (In Program
mode).
Use this key when you see
STOP
or in the text.
