User manual D030-P Batch Controller
I
NSTALLATION
I
NSTRUCTIONS
– 3
FW-D030-P-MAN-EN-V0102_02
11
Power wiring type PX
Connect the “-”, GND or “0V” wire of your external power supply to pin P3. Connect the “+” wire
to pin P4.
With power wiring type PX pin S4 offers 8.2V to power a device in the field
Power wiring type PD
Figure 8:
Power wiring type PX
D030-P
P4
8-30Vdc
P3
With power wiring type PD / PM pin S4 offers a limited sensor supply (8.2/12/24V) to power the
flowmeter in the field.
Figure 9:
Power wiring type PD DC / AC – with flowmeter supply
D030-P
P4
24Vdc ±10%
P3
S4
Power supply to flowmeter
, see Figure
7: "Voltage switch positions" for settings
P2
24Vac 50/60Hz
P1
0V
+
+
+
-
+
0V
+
+
-
~
~
ground - yellow / green
P
0
