User manual D030-P Batch Controller
2 –
S
PECIFICATIONS
OF
THE
D030-P
6
FW-D030-P-MAN-EN-V0102_02
Outputs
Control output
Output type
Control output according the batch process.
Type OH Active 24V DC transistor output; Requires PM/PD. Max load
75mA
Passive transistor output - not isolated; Requires PM/PD. Max.
24V DC - 300mA.
Type OR Isolated electro-mechanical relay (NO/NC); max. resistive
load: 2A@230Vac / 30V DC. Pilot duty rating: 0,5A @ 230Vac.
Requires PM/PD (DC).
Note
: In case of inductive load, use RC snubbers.
Type OT Passive transistor output (NPN) - not isolated; Max. 50V DC -
300mA.
Operational
Operator functions
Displayed functions
• Preset value - can be entered by the operator
• Total and accumulated total
• Batched quantity or remaining quantity
• key-word messages
Preset and Total
Units
L, m3, GAL, USGAL, kg, lb, bbl - no units
Digits
7 digits
Displayed decimals configurable 0 — 3
Accumulated total
Units / Decimals
Identical to selection for "Total".
Digits
11 digits
Note:
Total can be reset to zero by pressing the STOP key
twice.
Note:
Accumulated total can
not
be reset to zero.
