User manual D030-P Batch Controller
4 –
C
ONFIGURING
THE
D030-P
20
FW-D030-P-MAN-EN-V0102_02
Modes of Operation
Shelf Mode
In Shelf mode the D030-P shuts down and can be shelved, stored or transported without draining
the battery. All settings in EEPROM remain stored, even when the battery is removed.
To wake the unit up press the center button (
START
/
) twice to bring it in Operator mode.
Operator Mode
Operator functions and rights can differ per unit: they depend on settings and options. For
information on Operator mode see "Operating the D030-P" on page 27.
Setup Mode
In Setup mode you can browse, select and view all function items. From here you can also access
Program mode to change current settings.
Function items are arranged in function groups, and can be accessed as shown below.
1 To access Setup mode press and hold
PROG
7 seconds. While waiting the display shows . When
asked for a password, follow the instructions in "Password Protection" on page 19.
You enter Setup mode in function group 1. The
indicator lights up.
2 How function items are arranged in groups is listed on page 22. To browse to the desired
function item:
a select the function group containing the item by repeatitly pressing .
b select the function item by repeatitly pressing .
3 You now have the following options:
-
To change the value
of selected function item press
PROG
. See "Program Mode" on
page 21 for follow-up instructions.
-
To select another function item
go back to step 2.
-
To exit
wait 20 seconds. The D030-P automatically returns to Operator mode.
Alternatively you can press and hold
ENTER
3 seconds. This has the same effect.
Figure 22:
Matrix structure SETUP-level
SETUP
