FW-D030-P-MAN-EN-V0102_02
1
1
CHAPTER
Introduction
System Description of the D030-P
Functions and Features
The Batch Controller model D030-P is a microprocessor controlled device for batching and filling
of small batch sizes up to medium large quantities as well as displaying total and accumulated
total .
The D030-P has been designed with a focus on:
• Ultra-low power consumption, to allow for battery operation of up to five years.
• Front panel mounting solution based on IP66/67 (Nema4X), suitable for harsh industrial
surroundings.
• Very easy and user-friendly installation and programming through an easy menu-driven
structure. Know one, know them all!
• Ability to process all type of signals.
• One control output for controlling a pump or valve.
Field Input
The “P” in D030-P indicates a pulse flowmeter input. Other versions are available to process (0)4-
20mA “A” or 0-10V “U” flowmeter signals.
• The D030-P can read one passive or active flowmeter with a passive, active, Namur or sine
wave (coil) pulse output.
• To power the flowmeter, several options are available.
Standard Outputs
The following output is available for the D030-P:
• Control output: This passive transistor output controls the valve or pump for the batch
process.
Control output
Figure 1:
Typical application of the D030-P
